090930 Skyscraper 03

I have been working on Skyscraper 03 for more than 12 hours and finally I've got the scripts working, STL ready, and renderable. Pretty happy about the result to be honest. And hopefully the 3d-print will work perfectly fine for my 1:1000 model.

I will go through the process from here on.


Imported the mapped-points-drawings into AutoCAD which the acquirement of points have been illustrated in the previous post.


Started mapping up the highlighted points using dots and crosslines.


Here's the results for the 4 categories


I decided to use square panel for the dots. The facades of the tower are also laid out with 10m x 10m square grids


Array across the panels with the 4 block panels. Rotate them to give more variations on the facades


It seems that 10m x 10m will contain a lot of points. So I made the grid to 20m x 20m and the density of points is just about right


Import the dwg/dxf file into Rhino


Applied Voronoi-2D script on facade and started to create some floor plates.


The wireframe generated by Voronoi-2D is then imported to 3ds max for piping (i.e. making from lines/curves to solid/mesh)


Isolated the wireframe to reduce memory usage for Scripts


I have modifed the script that I wrote in the previous post. This script is more simple. What it does is considering
-> each cell as individual
-> offset curve inward
-> CurvethroughPolyline
-> clean up the scene
This script can be made much better in terms of the return and the input variables.


Then I did a simple PlanarSrf command by selecting all curves in the scene to create the cutout surfaces


I wrote another script for this particular move - Extrude each surface to its normal.
Each surface has their own normal of extrude. If you type in ExtrudeSrf and select all the surfaces, you might encounter a problem where some surfaces might extrude along the construction plane which is undesirable. So this script does:
-> enter extrude height value (preset Cap and Both sides prior to runscript)
-> considering each surface
-> extrude individually via its normal
-> clean up the scene
It runs quite a while and this is the result with a thickness for the "membrane"


This image shows the combination of the primary cell structure + the membranes


Playing with the shapes of the floor plates


And stack them up with a rotating configuration. The idea here is to create some double volume spaces.


Here is the overall model!


Import the whole model into 3dsmax for basic renderings


Rendering in process... and below are the resulting renders.









I like this render the most.

090927 Sunlight Study 02

Another sunlight study has been done.

This time I set Tower 01 at 180m in height and keep Tower 02 the same at 220m in height.







Here are the results:

In Winter:






In Summer:






They all are positive results. I will use this building height as a restrain/guide for further design development.

090926 Sunlight Study 01

I have done the first sunlight study on the proposed site. From my preliminary sketches in previous post, I proposed two towers on the east and west of the site to create a grand central axis connecting the Perth Concert Hall to the river.

The sunlight study is essential to see how high the towers can be and how the towers will impact on the site and the surrounding. Major issues would possibly be Views and Shadows.

In the first run, I have set the west tower at 300m high and the east tower at 220m high to see how much shadow they will cast around the site.









The date for lowest sun angle (winter) and highest sun angle (summer) is from the Sun Angle Calculator in Vray Rhino. It is more accurate than the 3ds max one.



In Perth, the lowest winter sun angle is on 2009-06-22 with Azimuth of 5.22113' and Altitude of 34.3702'. The highest sun angle is on 2009-12-17 with Azimuth of 18.9663' and 80.8911'. Here are the first set of results:

In Winter:




In Summer:




In winter, two towers will not cast shadow over surrounding buildings but not for the summer sun. The results show that there will be sometime that the Tower 1 (300m) will cast shadow on 1) east building of Swan Bell Tower 2) Tower 2 (220m) and 3) east building of Perth Concert Hall.

I guess it is possible to have perfect shadow if I flip the height of the two towers the other way round, i.e. Tower 2 is 300m and tower 1 is 220m.

From the sunlight study, the height of the towers can be determined. So hopefully, the result from second sunlight is positive which will be tested tomorrow.

090926 Tutorial 09

In this tutorial, we were to finish up the previous 3d modelling from last tutorial and to create front and back renders + a slideshow presentation in class.


The original image "reflected arrow" by Jeffrey Smart


Front render with pshop post-editing


Back render without editing

For the presentation process slideshow, please click here for the pdf file.

090920 Tutorial 08

In the previous tutorial class, we were required to analyse a Jeffrey Smart piece, collaborate with our peers, reinterpret the image, and represent this image with 3d softwares and rendering tools.

The image the our group pick is called "Reflected Arrows" by Jeffrey Smart in 1974. You can see more of his works from here and here.


Reflected Arrows by Jeffrey Smart in 1974

Here are some of the process works:


Setting up scene


Modeling background building


Modeling puddles


Modeling the circular signs


Preparation of political figures to be mapped on to the signs


Abstracting the human figures in the scene


Material palette in 3D Studio Max


Running trial renders with mental ray